CE approved!! Double pump multifunctional Hemodialysis machine/ DIALYSIS machine HM02 for sale

CE approved!! Double pump multifunctional Hemodialysis machine/ DIALYSIS machine HM02

Techinical Specification:
- Open system allowing the utilization of consumables from different suppliers
- 15" touch-screen monitor, rotatable, display of icons, words for quick and easy use
- Operating instructions shown on the high-resolution 15" TFT monitor
- Volumetric ultrafiltration control and sequential ultrafiltration
- Integrated status indicator in the monitor
- Fully automatic self-test prior to any start of dialysis automatic priming
- Heparin pump for syringes from 10 to 30 ml, programmable infusion (no infusion, profiled infusion, auto-bolus or continuous infusion)
-Bicarbonate powder cartridge holder: for dialysis treatments with cartridges for hygienic dialysis
-Blood leak and air bubble detector
-Continues on-lin Kt/V measurement without the need of any disposable supplies
-Automated temperature and pressure measurement
- Six individually programmable and/or preset profiles for
Dialysate temperature
-Sodium
-Ultra-filtration
-Bicarbonate
-Dialysate flow
-Heparin rates
-Dialysis flow rate adjustment from 300 to 800 ml/min in individual steps of 1 ml
-Pyrogene and endotoxin filter to produce ultrapure dialysis fluids
-One blood pump with adjustable settings
-Battery power supply in case of power breakdowns (15 minutes d'autonomie)
-Automated blood pressure measurement (ABPM), non-invasive by oscillometric method, various programmable cycles
-Biologic RR Comfort, automated blood pressure stabilisation based on blood pressure related ultrafiltration control without the need of any additional propriety disposable supplies Crit-Line interface connection allows the connection of the Crit-Line device to the Dialysis Machine. -Crit-Line is a fluid management access monitoring tool. It measures the absolute hematocrit in percent, assesses haemoglobin, measures continuous oxygen saturation and vascular access recirculation Patient disc and card reader: this option registers automatically the patient at the machine, activates automatically the set-up of all patient individual dialysis parameters and saves treatment data on the patient card
-Single-needle dialysis as SN click-clack (requires no specific blood tubing)
-Pressure sensor (PBE) to identify coagulation in dialysers prior to any transmembrane pressure (TMP) alarm
- Integrated timer on/off for automated disinfections/preparation procedures
- Programmable cleaning and disinfection modes, for chemical, heat or a combination of chemical/heat disinfection, programmable weekly disinfection table, validated heat-disinfection for citric acid 50% (bactericidal, fungicidal, tuberculocidal, virucidal, inactivation incl. HBV, HCB, HIV)
- Automated standby function to safe permeate, concentrates and energy in preparationmode
- Complies with EN 60601
- CE approved
- Power: 220 Volts AC, 50 Hz.
- Plug type: CEE 7/7
Optional:
- Same configuration as above but with double pump

Water Treatment System Two unit each Can Support Twenty Heomodilaysis Machines

2.1 Per-filtration system including:
-Back flush filter and pressure-reducing valve
-Booster pump
-Sand Filter System and / or
-CIR Filter System for remove of ferric, manganese, sulphur in clear drinking water
-Activated Carbon Filter System For rest dechlorination of drinking water
-Chlorine Filter for treatment of chlorinated portable water
-Double softener system
-Media rail panel:
- Aluminium channel with dead zone free permeate connections.
- All connectors are heat-disinfectable and resistant for hot water.
- Single place or double place connectors available for permeate, drain water and concentrate.
- The panel includes a centralized drain column system – which is covered by the same Aluminium cover as the main panel itself, it prevent smell and noise.
- Inside the panel there is an isolation to keep the Pe-Xa loop constantly heated up while a heat disinfection process is on-going.
- Upgrades of additional connectors and extensions are easily possible because of the compact design and the flexible components.
- Ultrafiltration and Heat-disinfection
- Ultrafiltration guarantees a reliable retention of bacteria and endotoxines. The heat-disinfection enfolded the whole permeate ring-main as well as the dialysis connection pipe inclusive the inlet sector.

Equipment / Specifications
Patented procedure of Ultrafiltration of permeate
High lifetime of the ultra-filter by cross-flow-operation
Water economy by concentrate recirculation of the ultra-filter to the reverse osmosis
3-step permeate pressure valve for fully automated filling of the tank at permeate oversupply
Micro controller processed
Integrated pressure pump
Compatible for reverse osmosis systems

Hygienic
- Complete V4A-tubing, inside surface refined with clamp connectors
- PVC-free assembly of the tubing

Performance data:
- Tank volume: 500 litres, usable water quantity ca. 480 litres
- Double walled stainless steel tank (1.4404) with Isolation
- Ultrafiltration membrane made of polyether sulphone

Retention:
-Bacteria retention > 5 log step (Factor 100.000)
-Endotoxin retention > 5 log step (Factor 100.000)
-Temperature at heat disinfection > 75°C

Mechanical connections:
- Permeate input, permeate reduction reverse osmosis, permeate ring-main feed, permeate return, 3 metres pressure tube DN 20, drain HT 50 (com. to ring feeding tube connector and ring return connector)
Electrical data:
- 400 V, 3~/N, 50-60 Hz, max. 14 kW
- Heater 12 kW, pressure pump max. 2 kW
- Dimensions / Weight (WxHxD): 790 x 1950 x 1450 mm / ca. 350 / 850 kg (tank empty / full)

Optional:
Water Protector
- Temperature sensor for measuring of temperature at the beginning of the ring
- Cutting unit for shut-off of the permeate supplying during the chemical disinfection of the reverse osmosis without opening the ring-ain.

Manufactured to MPG/MDD – System of group IIa

2.2 Central reverse osmosis unit
- All pipe work manufactured in stainless steel. Free of dead legs at the conduit and connectors which grants permeate of highest purity (purified water).
- Products graded in permeate capacity / extension class:
350 l/h, 700 l/h, 1050 l/h, 1400 l/h, 1750 l/h
- Permeate capacity each at 12°C water temperature

Upgradable by extension sets.
- For increased performances several systems can be connected in parallel.

Water inlet:
- Inlet pressure min.: min. 3 bar at 1000 l/h to 3000 l/h dynamic
- Inlet pressure max.: 6 bar static (pressure reducer in front of the system required)

Voltage:
- 230/400V 3-phase 50 Hz
- 230/400V 3-phase 60 Hz
- 115/200V 3-phase 60 Hz

- Power consumption electric: 3 kW

Used Guidelines, standards and regulations:
- Guideline of Council 93/42 EWG Medical Device Directive
- Medical electrical equipment – Part 1: General requirements for safety (IEC 601-1:1988 + A1:1991 + A2:1995)
- Safety requirements for electrical equipment for measurement, control, and laboratory use part 1: General requirements (IEC 61010-1:2001)

Temperature sensor:
- Monitored temperature at permeate for system protection.

Optional overflow valve:
-An additional overflow valve made of stainless steel provides over-temperature protection of the ringmain and dialysis machine.
- Pressure monitoring: The following pressures are monitored:
- Permeate pressure electronic
- Inlet pressure electronic and by pressure gauge
- Pump pressure by pressure gauge
- Conductivity measurement: Plug-in conductivity sensors monitored the following conductivities:
- Softened water
- Permeate
- Fine wire fuses: Protects the control and monitoring circuits against possible overload.
- Short regeneration time (approx. 25 minutes) (DVGW approved).
- 20" Pre-filter System for removal of medium and smaller particulate matter.
- Housing material: PP pressure resistant up to 8.6 bar
- Filter insert: 5 u m absolute cartridge
- Ball valve for soft water control and sampling.
- Frame and break tank manufactured in prickled stainless steel (AISI 304).

Pressure Pumps
Type:
-Grundfoss CRi 3-25 (50 Hz) / CRi 3-31 (60 Hz)
-Grundfoss CRi 3-17 (50 Hz) / CRi 3-21 (50 Hz)

Material:
- All wetted parts in stainless steel

Type of pump:
- Vertical, normal suction pump.
- With maintenance-free sliding seals.
- Connection by hygienic clamp-connectors.

Membrane housing
-Material: stainless steel AISI 316L. Matt pickled outside and inside. 4"membrane
-Membrane equipped with thin film polyamide membranes 4"
-DOW XLE-4040 – polyamide wounded – Extra Low Energy
-Retention rate of inorganic substances: > 98%
-Pipe work in stainless steel AISI 316L / AISI 316Ti. Matt pickled outside and inside.
-Ball valve in stainless steel with position permeate to ring main resp. permeate to drain for service requirements.

Main controller consisting of:
- Control board: Performs all control and monitoring functions. Self-checking on start-up
- Text display: Provides menu, guidance, displays for alarms, operating conditions and limit values.
- Keyboard: 4 button handling.
-Optional remote control controlling and monitoring from a central control room.